The project \"PHOTONIC EMITTERS CUSTOMIZABLE AND INTEGRATED INTO CHIP MAKING ONE OF NINE 3D ENCAPSULATION PROCESSES, FOTUNECHIP\" aims at industrial research oriented to obtain intelligent and dynamic chips incorporating photonic emitters. The file number is:
EXP 00161914 / MIG-20231001 and is included in the \"Science and Innovation Missions Program\" linked to the PERTE of microelectronics and semiconductors, Call 2023.\"

https://fotunechip3d.es/

The project “CONTINUOUS MONITORING OF THE TECHNICAL INFRASTRUCTURE OF ICUBE ENGINEERING INTERNATIONALIZATION AND INNOVATION” developed by ICUBE, is co-financed by the Government of the Principado de Asturias through the SEKUENS Agency, and by the European Union with FEDER Funds.

The main objective is the development of a tool that, by applying artificial intelligence, resolves the fact that within the internal processes of companies, there is one whose function is the allocation of resources to each potential project, it is the main viability decision variable. of the same. The manual work in making this type of decisions, and the limited intervention of optimized data cause many of these projects to end with cost overruns and underestimations, therefore, research in the application of AI is essential to resolve this problem. . to determine whether the projects to be carried out are approved or not, based on technical and economic criteria and that once approved, the allocation of resources is done in an optimized manner. Thus, MOTION\'s central objective is to apply artificial intelligence based on data processing and optimization algorithms to increase the effectiveness of companies in project management.

GENERAL OBJECTIVE

Apply artificial intelligence to increase the effectiveness of companies in project management.

SDGs on which it impacts

8. Decent work and economic growth.

9. Industry, innovation and infrastructure

12. Responsible production and consumption

17. Partnerships for the goals

Call: Order of April 11, 2023, of the Ministry of Industry, Commerce and Tourism, within the framework of the Recovery, Transformation and Resilience Plan, co-financed by the Next Generation funds of the European Union

Participating entities

AEICE | 1A INGENIEROS | 1A DIGITAL | ICUBE | Metaindustry4

ICUBE Ingeniería Internacionalización e Innovación has obtained support for Integral Digitization of ICUBE.

The corresponding help is applied for the implementation of improvement solutions in the areas of process, product and business model of the company, within the environment of industry 4.0.

This action is co-financed by the Goberment of Asturias through the Institute of Economy Development of the Principality of Asturias as well by the European Union through the European Regional Development EFRD Funds and Industry 4.0 of Asturias through the help Program for Digital Transformation 2021.

The ICUBE project “DEVELOPMENT AND IMPLEMENTATION OF THE CORPORATE SOCIAL RESPONSIBILITY SYSTEM IN ICUBE”, with file number: IDE/2021/000166, is co-financed by the Government of the Principality of Asturias through IDEPA and by the European Union through the ERDF Funds

The ICUBE project \"Corporate Image Design, to obtain the Corporate Identity Manual in ICUBE\", with file number: IDE/2021/000165, is co-financed by the Government of the Principality of Asturias through IDEPA and by the Union Union through the EFRD Funds

Icube tiene concedida una Ayuda dentro del Programa Jovellanos para la incorporación de titulados universitarios para el desarrollo de actividades de I+D+I, asociada al proyecto PERVIN-SC en el que estamos trabajando en un Estudio de guiado mediante sistemas de visión inteligente por perfilometría para la realización de soldaduras metálicas en continuo y validación experimental. La referencia de la ayuda es 

AYUD/2021/56860 - IDI/2021/000137

Icube tiene concedida una Ayuda dentro del Programa Jovellanos para la incorporación de titulados universitarios para el desarrollo de actividades de I+D+I, asociada al proyecto Almagreen en el que estamos trabajando en un Sistema reconfigurable y flexible de almacenamiento de energía renovable a partir de residuos. La referencia de la ayuda es 

AYUD/2021/56873 - IDI/2021/000139

Icube contracts with a specialized provider to develop and customize an advanced management software (ERP) for the administration of maintenance contracts.

The project belongs to the call for grants aimed at companies in the Principality of Asturias within the framework of the Check Program, within the category Digitalization of the company.

The action is co-financed by the Government of the Principality of Asturias through IDEPA, as well as by the European Union through the European Regional Development Fund (ERDF).

The (PREDIRE) 3D project is based on the development of a simulation solution based on finite element calculations, capable of predicting potential thermal distortions in elements manufactured by additive manufacturing technology. For the development of the present project, the use of finite element software (ANSYS) is foreseen. The components under study will be fundamental elements of innovative industrial refrigeration systems, which will be manufactured using 3D techniques. The designed and manufactured elements will be validated according to a detailed dimensional control study, which will allow to establish the validation and optimization of the developed predictive tool.

The action is co-financed by the Government of Asturias through the Economic Development Institute of the Principality of Asturias and the Science, Technology and Innovation Plan (PCTI) as well as by the European Union through the European Regional Development Fund (ERDF).

ICUBE Ingeniería Internacionalización e Innovación participates in BIOPLAMT project whose objectives are the investigation of new biotechnological processes for transforming by-products into products with greater added value and the design and assembly of a pilot scale facility where bioprocesses developed in the laboratory can be scaled up. The aim is to develop a biotechnological process at pilot plant scale for the transformation of industrial by-products into bioplastics. In order to obtain these biomaterials, it is essential to investigate the biological processes in the laboratory and to have facilities to study the transition from scale to industrial production.

The action is co-financed by the Government of Asturias through the Economic Development Institute of the Principality of Asturias and the Science, Technology and Innovation Plan (PCTI) as well as by the European Union through the European Regional Development Fund (ERDF).

The proposal will be carried out between Industrias Lácteas Asturianas, Ingénica, ArcelorMittal and Icube, with the technological collaborators Idonial and EntreChem.

R&D project for the design of a multifunctional steel powder production equipment to obtain new products for additive manufacturing and other applications. This project has been financed by the Economic Development Agency of the Principality of Asturias (IDEPA) and Community Funds from the European Regional Development Fund (ERDF)

ICUBE participates in the project “Development of a water-soluble nanocomposite for moulds and supports manufactured by 3d printing for its application in composites for the aeronautical and automotive industry - NANOSOL 3D“ whose objective is the design and development of a specific FDM head for the processing of nanostructured thermoplastic, as well as the development of FDM system prototype with a work volume capacity of 1m³.

The project has been financed by the CDTI through the Program INNOGLOBAL 2016 (Project INNO -20161027), supported by the Ministry of Economy, Industry and Competitiveness.

R&D project on heat-pipe technology. This project has been financed by Economic Development Agency of the Principality of Asturias (IDEPA) and Community Funds From the ERDF.

ICUBE Ingeniería Internacionalización e Innovación participa como socio en el proyecto “Augmented Factory 4.0 (AF4)” liderado por Felguera Tecnologías de la Información en el que  también participa la empresa Magtel Operaciones, el cual ha iniciado su actividad en julio de 2015 y finalizará en diciembre de 2017, está subvencionado por el CDTI a través del Programa FEDER INNTERCONECTA (Proyecto ITC-20151231), está apoyado por el Ministerio de Economía y Competitividad y cuenta con cofinanciación del Fondo Europeo de Desarrollo Regional (FEDER).

R&D project for the test of artificial vision and mechatronics technologies using an experimental system.

ICUBE was granted as Tecnological Based Enterprise in the second phase of the call for grants. 

Tractor project (regional impulse funds) where is developed a new experimental lamination plant.  Lead by ArcelorMittal with engineering works of Icube.

R&D project on steel sector. This project has been financed by Economic Development Agency of the Principality of Asturias (IDEPA) and Community Funds From the ERDF. Resolution on 30/12/2016.

Viability Studies for developing new electronic PCBs based on coal materials. It has been financed by Economic Development Agency of the Principality of Asturias (IDEPA) and Community Funds From the ERDF.